Anti PID device for solar systems
11 DC +/- outputs, supports up to 11 Inverters - 1500V

Dispositivo anti PID para sistemas solares
10 saídas DC +/-, suporta até 10 Inversores - 1500V

Anti PID device for solar systems
9 DC +/- outputs, supports up to 9 Inverters - 1500V

Anti PID device for solar systems
8 DC +/- outputs, supports up to 8 Inverters - 1500V

Anti PID device for solar systems
7 DC +/- outputs, supports up to 7 Inverters - 1500VV

Anti PID device for solar systems
6 DC +/- outputs, supports up to 6 Inverters - 1500V

Anti PID device for solar systems
5 DC +/- outputs, supports up to 5 Inverters - 1500V

Anti PID device for solar systems
4 DC +/- outputs, supports up to 4 Inverters - 1500V

3 DC +/- outputs, supports up to 3 Inverters - 1500V

2 DC +/- outputs, supports up to 2 Inverters - 1500V

Anti PID Device for Home Solar PV Systems Up to 25Kw.
For your home PV (solar photovoltaic system), the Vigdu-P 11 device is the ultimate solution to prevent PID and recover your system efficiency due to PID power degradation.
It is a permanent solution that restores the performance and revenue of your solar PV system.
Compact and easy to install anti PID device with plug & play connection and IP65 outdoor protection.
1 DC +/- output, supports up to 1 Inverter - 1500V

UMG 104, with a 500 MHz DSP (digital signal processor), is a fully fast and powerful network analyzer. The continuous analysis of the 8 channels with 20 kHz per channel allows the recording of the electrical parameters (more than 800 values), minimum and maximum values, the essential voltage quality values as harmonics (up to 40, each phase with the recognition of the address). On the basis of data that production failures can be avoided, concepts can be developed for example to reduce energy costs, the measures taken and with the UMG 104 the achieved improvements can be monitored and documented. Through modern communication architectures the recorded data is sent to a central location, centrally stored in efficient databases and available for further processing in an open architecture. The easy connection of an available building control system or SPS environment extends the areas of use of the UMG 104.

Control center and energy manager via Ethernet, including Energy Meter.

Temperature range - 40 °C to + 90 °C (for fixed and flexibleinstallation)
Max. Temperature at conductor + 120°C (20.000 h, 50 % residual elongation)
Rated voltage U0/U AC 1,0 / 1,0 kV DC 1,5 / 1,5 kV
Resistance weather-resistant and UV-resistance

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / U AC1.0 / 1.0 kV DC 1.5 / 1.5 kV
Weather and UV resistance

Three-phase bidirectional meter.
Nominal voltage 230 V/400 V
Frequency 50 Hz/±5 %.
Nominal/limit current per phase conductor 5 A/63 A (>63 A combined with external current transformers)
Starting current <25 mA
Connection cross-section From 10 mm² to 16 mm² 1) (for 63 A protection)

medida Indirecta.

Convertidor de corriente
Set formado por un transductor de medida 1 A y una bobina Rogowski con línea de señales. Longitud de la bobina Rogowski: 600 mm, diámetro: 190 mm. Longitud de la línea de señales: 10 m. La bobina Rogowski mide corriente AC de barras colectoras y líneas de alta tensión

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance