UMG 104, with a 500 MHz DSP (digital signal processor), is a fully fast and powerful network analyzer. The continuous analysis of the 8 channels with 20 kHz per channel allows the recording of the electrical parameters (more than 800 values), minimum and maximum values, the essential voltage quality values as harmonics (up to 40, each phase with the recognition of the address). On the basis of data that production failures can be avoided, concepts can be developed for example to reduce energy costs, the measures taken and with the UMG 104 the achieved improvements can be monitored and documented. Through modern communication architectures the recorded data is sent to a central location, centrally stored in efficient databases and available for further processing in an open architecture. The easy connection of an available building control system or SPS environment extends the areas of use of the UMG 104.

Regulation and monitoring of photovoltaic systems. For installations up to 2000 kWp.

A power meter transmits the measured amount of power to the SolarLog for analysis. It serves as a consumption meter, showing a comparison of produced and consumed power. It can be configured to operate with the SolarLog in three different modes:
- Measuring energy consumption for optimal utilization of the power generated.
- Measuring the total amount of energy that has been fed into the grid.
- Measuring the energy production of inverters that are not directly managed by SolarLog.

Registrador de datos con sensores de temepratura del módulo y radiación

Con 8 salidas de relé

Modbus 3-phase current meter

AC current meter

Conexión para gestión de energía para SolarLog Base

Módulo de expansión de interfaces para SolarLog Base

Regulación y monitoreo de sistemas FV. Para instalaciones hasta 100,99 kWp

Regulación y monitoreo de sistemas FV. Para instalaciones hasta 15,99 kWp

Registrador de datos